Application Guide

PreTreat Powder Coating Touch-Up Pens

Our Touch-Up Pens provide an easy, all in one applicator for the repair of powder-coated paint surfaces.

Available in a choice of three finishes – Gloss, Satin, or Matt – the PreTreat Touch-Up Pens come as a transparent base compound that should be mixed with the original powder coating to ensure a good quality match and colour consistency.

We have created the following guide to help make the repair and refurbishment of your powder coat paint surfaces as straightforward and quick as possible.

How To Use The PreTreat Powder Coat Pens

Other Details

Drying Time

The surface drying time is approximately 20 minutes depending on temperature, air movement and thickness applied. It is best to allow at least 24 hours before being fully dried.

Storage Stability

Un-mixed (separately) 12 months. In dry frost proof conditions. Store in a cool place away from foodstuff and incompatible materials.

Packaging

1 pen of 12 Mls, Flat Matt, Satin, or Gloss. Please specify when ordering.

Disclaimer

PLEASE NOTE THAT THE INFORMATION ABOVE IS ONLY A GENERAL GUIDE TO OPERATING THE PROCESS. TECHNICAL SERVICES WILL RECOMMEND THE OPERATING PARAMETERS SUITABLE FOR SPECIFIC PLANT.

EVERY ENDEAVOUR HAS BEEN MADE TO ENSURE THAT THE INFORMATION WE PROVIDE IS RELIABLE, BUT WE DO NOT ACCEPT ANY LIABILITY FOR ANY LOSS, INJURY OR DAMAGE WHICH MAY RESULT FROM ITS USE.

A warranty, expressed or implied, cannot be supplied as results may vary depending upon application conditions.